Back to Find Courses page

Bachelor of Engineering (Honours) in Mechanical Engineering

Bachelors Honours Degree (C/w)

Course snapshot

Domestic snapshot

  • Course abbreviation

    BE(Hons)Mech

  • Course code

    3507328

  • Credit points

    384

  • Equivalent units

    32

  • Indicative Fee

    Commonwealth supported

Overview

The Bachelor of Engineering (Honours) in Mechanical Engineering equips students with the relevant skills and knowledge to provide a range of professional mechanical engineering services in regional, national and international environments. The course prepares graduates for work involving the design of machinery, water supply, vibration, acoustics and noise control, robotics, heat transfer and refrigeration, energy technology, consumer product design, pollution control, and production planning.

The course is structured around the 16 competencies identified by Engineers Australia as being essential to the graduating engineer. These competencies are broadly grouped into: knowledge and skills, application, personal and professional skills.

Throughout the course, students develop core theoretical knowledge and skills vital to the engineering profession and the ability to apply these in the most relevant software applications.

Graduate AttributeCourse Learning Outcome
Intellectual rigour

Develop research skills in order to be able to design plan and execute a research project with some independence.

Identify all influencing factors in complex engineering problems and to think about the macro and micro ramifications.

Develop cognitive and technical skills to review, analyse, consolidate and synthesise engineering knowledge to identify and find solutions to complex problems with intellectual independence.

Creativity

Adapt knowledge and skills in diverse contexts to form alternative solutions to complex problems.

Ethical practice

Apply ethics and judgment to complex engineering problems.

Knowledge of a discipline

Develop technical skills and an in-depth understanding of specialist bodies of engineering knowledge.

Develop conceptual understanding of the mathematics, numerical analysis, statistics, and computer and information sciences that underpin the engineering discipline.

Lifelong learning

Self manage and be resourceful and effective at developing new knowledge and applying it to engineering problems.

Demonstrate computer literacy skills in both standard applications and discipline specific applications.

Develop appropriate professional practice, reflection skills and engineering competencies through study and professional practice.

Communication and social skills

Effectively communicate engineering ideas, concepts and arguments using written mediums to a variety of audiences.

Verbally communicate and influence a variety of audiences including the engineering team, community and people of diverse backgrounds.

Cultural competence

Engage with diverse cultural and indigenous perspectives with the engineering environment.

Students further develop their skills and knowledge and prepare for their careers as professional mechanical engineers, during a 60-day industry placement.

Students engage with industry representatives from the early stages of the course, creating valuable professional networks.

The course addresses the fundamental areas of mechanical engineering including: applied mechanics, fluid mechanics, thermodynamics, dynamics, manufacturing, and materials.

All students undertake a full-year subject in engineering research (thesis unit) in their final year, which enables them to explore the frontiers of engineering development and contribute to new knowledge in their chosen field.

Location Teaching period UAC code QTAC code
Lismore Session 1 334109 054301

Career Outcomes

Engineers Australia is the professional body representing engineering in Australia. Southern Cross University has provisional accreditation for the degree from Engineers Australia.

Accreditation of the course by Engineers Australia enables a student’s qualification to be formally recognised in many different countries throughout the world in accordance with the Washington Accord, an international agreement governing recognition of engineering qualifications and professional competence, visit: www.washingtonaccord.org.

Requirements

We encourage you to apply for the courses you most want to study. If you are not eligible to enter your chosen course right now, our team will work with you to find the best pathway option.

Before applying, make sure you double check all entry requirements, gather required documentation and review the University’s Rules Relating to Awards, noting any specifics listed below.

Entry requirements

Credit for prior learning

Advanced Standing Pathways will be explored in due course.

Course requirements

To be eligible for the award of Bachelor of Engineering (Honours) in Mechanical Engineering a candidate shall successfully complete the equivalent of thirty-two (32) units (384 credit points) comprising:

  1. all units listed in Part A; and
  2. two (2) units from Part B

and additionally complete at least 60 days of industrial experience of a nature acceptable to the Course Coordinator.

Class of Honours

A candidate may on the recommendation of the Course Coordinator be awarded Honours with one of the following merit descriptors:

  • First Class Honours
  • Second Class Honours – Division I
  • Second Class Honours – Division II

Merit Descriptors

The following criteria shall be satisfied to obtain a particular merit descriptor:

  • First Class Honours: a Weighted Grade Point Average (WGPA) of at least 6.0 and a Grade Point Average (GPA) of at least 6.0 in both units Engineering Thesis I and Engineering Thesis II
  • Second Class Honours – Division I: a Weighted Grade Point Average (WGPA) of at least 5.5 and a Grade Point Average (GPA) of at least 5.5 in both units Engineering Thesis I and Engineering Thesis II
  • Second Class Honours – Division II: a Weighted Grade Point Average (WGPA) of at least 5.0 and a Grade Point Average (GPA) of at least 5.0 in both units Engineering Thesis I and Engineering Thesis II

A student with a Weighted Grade Point Average (WGPA) of less than 5.0 shall not be eligible for a merit descriptor.

Weighted Grade Point Average Calculation

The Weighted Grade Point Average (WGPA) shall be calculated according to the formula:

WGPA = {Summation of (Grade Point x Credit Value x Weighting)}/{Summation of (Credit Value x Weighting)}

where:

Grade Point = achievement value assigned to a unit grade (non-graded units, interim notations and advanced standing shall not be included in the WGPA calculation);

Credit Value = number of credit points awarded for the completion of a unit of study;

Weighting = 1 for a unit listed in Year 1 of the Course Progression, 2 for a unit listed in Year 2 of the Course Progression, 3 for a unit listed in Year 3 of the Course Progression, and 4 for a unit listed in Year 4 of the Course Progression; and

WGPA calculations shall be based on results for the first attempt at each unit in the course.

Course structure

Your course progression is in the recommended order you should complete your course in. It is important that you follow this to ensure you meet the course requirements. For further assistance see How to Enrol in Units using My Enrolment.

Students should use course progression information to select units specific to their course and enrol in these units using My Enrolment.

Unit Code Unit Title Available Credit points Level of learning Notes
Year 1, Session 1
ENG10759 -  Processes and Philosophy of Engineering Introductory
PHY10760 -  Physics and Materials Introductory
MAT10251 -  Statistical Analysis Intermediate
Choose either: MAT10001 -  Foundation Mathematics OR MAT10720 -  Linear Algebra Introductory Note 1
Year 1, Session 2
ENG10758 -  Humanitarian Engineering Project Introductory
ENG10757 -  Applied Mechanics Introductory
Choose either: MAT71003 -  Mathematics for Engineers and Scientists OR MAT10719 -  Calculus Introductory Note 1
CHE00201 -  Chemistry Introductory
Year 2, Session 1
ENG20001 -  Mechanics of Materials Intermediate
ENI72001 -  Dynamics Intermediate
ENG20007 -  Engineering Computations Intermediate
ENI72005 -  Introduction to Mechanical Design and Manufacturing Intermediate
Year 2, Session 2
ENI73025 -  Thermodynamics Advanced
ENG20006 -  Fluid Mechanics Intermediate
ENG72001 -  Engineering Modelling and Experimentation Intermediate
ENI73005 -  Machine Element Design Advanced
Year 3, Session 1
ENI83005 -  Mechanical Systems Design Intermediate
ENI73001 -  Dynamics of Machines Advanced
ENI82005 -  Thermal Engineering Advanced
ENI73015 -  Electro-Mechanical and Robotics Technology Advanced
Year 3, Session 2
ENI81005 -  Energy, the Environment and Mechanical Engineering Introductory
ENI83015 -  Modern Internal Combustion Engines Intermediate
ENI73020 -  Fluids Engineering Advanced
ENI73009 -  Finite Element Method and Fracture Mechanics Advanced
Year 4, Session 1
ENG40001 -  Engineering Thesis I Advanced
ENG40007 -  Engineering Project Management and Professional Ethics Advanced
ENI83040 -  Control Systems and Automation Advanced
Choose 1 Unit (Available Units to be specified in due course)
Year 4, Session 2
ENG40004 -  Engineering Thesis II Advanced
ENG40005 -  Engineering Capstone Project Advanced Note 3
Choose 1 Unit (Available Units to be specified in due course)

Note 1:

Choose either: (a) MAT10001 Foundation Mathematics and MAT71003 Mathematics for Engineers and Scientists, or (b) MAT10720 Linear Algebra and MAT10719 Calculus. Students who have not completed NSW HSC Mathematics (2U) or QLD Maths B or equivalent must choose option (a).

Note 2:

Students must satisfactorily complete any 20 units from the Bachelor of Engineering (Honours) in Mechanical Engineering degree before undertaking this unit.

Note 3:

Double-weighted unit

Note 4:

Excluding units offered in Part A of the Schedule of Units.

Unit Code Unit Title Level of learning Notes

Part A
Choose either option (a) or (b) based on Note 1
MAT10001 Foundation Mathematics Introductory Note 1
MAT71003 Mathematics for Engineers and Scientists Introductory Note 1
Or
MAT10720 Linear Algebra Intermediate Note 1
MAT10719 Calculus Intermediate Note 1
Then complete all the remaining units in Part A
ENG10759 Processes and Philosophy of Engineering Introductory
PHY10760 Physics and Materials Introductory
MAT10251 Statistical Analysis Intermediate
ENG10758 Humanitarian Engineering Project Introductory
ENG10757 Applied Mechanics Introductory
CHE00201 Chemistry Introductory
ENG20001 Mechanics of Materials Intermediate
ENG72001 Engineering Modelling and Experimentation Intermediate
ENI72001 Dynamics Intermediate
ENI72005 Introduction to Mechanical Design and Manufacturing Intermediate
ENI73025 Thermodynamics Advanced
ENG20006 Fluid Mechanics Intermediate
ENG20007 Engineering Computations Intermediate
ENI73005 Machine Element Design Advanced
ENI73009 Finite Element Method and Fracture Mechanics
ENI73001 Dynamics of Machines Advanced
ENI82005 Thermal Engineering
ENI73015 Electro-Mechanical and Robotics Technology
ENI81005 Energy, the Environment and Mechanical Engineering
ENI83015 Modern Internal Combustion Engines
ENI73020 Fluids Engineering
ENI83005 Mechanical Systems Design
ENG40001 Engineering Thesis I Advanced Note 2
ENG40007 Engineering Project Management and Professional Ethics Advanced
ENI83040 Control Systems and Automation
ENG40004 Engineering Thesis II Advanced
ENG40005 Engineering Capstone Project Advanced Note 3

Part B

Unit Code Unit Title Level of learning Notes
Choose two (2) elective units from the following list. Additional units may be selected as approved by the Course Coordinator. Note 4
ECO00202 Ecological and Environmental Economics for Sustainable Development Intermediate
ENS00218 Waste Technology Intermediate
POL00010 Local Government Intermediate